TitleProduct

Top Sale 4045/3003/4045 Clad Aluminum Strip

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Henan

  • Validity to:

    Long-term effective

  • Last update:

    2017-12-21 06:08

  • Browse the number:

    45

Send an inquiries

Company Profile

Wuxi Taixie Metal Material Co., Ltd.

By certification [File Integrity]

Contact:Mr. Alex Liu(Mr.)  

Email:

Telephone:

Area:Henan

Address:Henan

Website: http://signialuminium.sy2000.net/

PRODUCT DETAILS
Top Sale 4045/3003/4045 clad aluminum strip

Aluminium brazing material production

Complex assemblies can be turned into single unit by just one pass through a brazing furnace. Aluminium brazing facilitates the joining of parts with a near-eutectic Ai-Si filler alloy, the liquid temperature which is about 50 º C lower than that of the core. In serial heat exchanger production the filler alloy is supplied via a thin clad on a core alloy.

Compound Material

Aluminium brazing material is a sophisticated multi-layer compound consisting of a core alloy which provides the stength and life cycle requirements of the heat exchanger and a clad brazing filler. A one-sided protection layer can also be clad, in order to prevent water-side radiator corrosion.

During brazing, only the clad brazing alloy melts, while the core alloys remain solid. The design and the applied materials of the heat exchanger are adjusted to optimize the brazing result regarding the required post braze mechanical properties as well as the corrosion resistance.

Roll cladding

Today, two basic cladding techniques, roll bonding and cast cladding, have become established industrially. Roll cladding is a solid-state welding process, which is used to join similar and dissimilar aluminium alloys, and represents the primary method of manufacturing fuselage skin sheet for aircraft, bright products and brazing sheet for automotive applications. The cladding layers are attached to the core slab by welding and metallurgical bonding using hot rolling. The cast cladding technique is based on a conventional direct chill mould modified in order to allow multiple metal streams to be casted into one single ingot.

Cladding thickness

Signi's well established, roll bonding process guarantees tight cladding thickness tolerances, which are essential for ensuring stable brazing results. Rather thin clad layers of 5% can be manufactured, as well as brazing materials also with a cladding thickness of 20%.

1> Tolerance according to EN and ASTM.
2> Higher thickness on request.
3> Special dimensions, tolerances, and alloys on request.





The state-of-art slitting line also allows Signi Aluminium to meet the demand for ever-closer width tolerances for tube stock materials. Depending on the material thickness width tolerances from max. 0.05mm up to max 0.20mm can be ensured.
Clad Alloys
Dimensions
  Strips Sheets
Thickness 0.051mm--3.0mm 0.4mm--6.35mm
Width 5mm--1600mm 500--1600mm
Length   Max. 10000mm
Edge quality Trimmed Trimmed and slit; sawn
Inside diameter 305mm, 405mm, 505mm Paper core, Aluminium core, without core.  
Outside diameter Max. 1600mm without connect point
 
Cladding
Cladding  One side; Both sides
Cladding rate 5%, 7.5%, 10%, 13%, 15% (other clad percentages available upon request)
Cladding tolerance Cladding thickness of 1.5%--<4%: +/-0.6
Cladding thickness of 4.0--6.0%: +/-1.0
Cladding thickness of 6.0--<=12.0%: +/-1.5
Cladding thickness of 12.0--20.0%: +/-2.0
 
Surface
Quality Mill finish; for thickness 0.3--3.5mm, chemically degreased
Marking Ink marking
 
 
 
Physical Property Data of Strip Material
Alloy Temper Thickness
(mm)
Tolerance
(mm)
Clad 
Ratio
(%)
Tensile 
Strength
(MPa)
Yield
Strength
(MPa)
Elongation
(%)
min
Application
3003 H14 0.08~0.12 ±0.005 None 150~200 ≥120 1 Evaporator fin and plate
3003  H26 0.3~0.35 ±0.015 None 190~220 ≥160 8 Glass mounting bracket material
3003 H14 0.06~0.1 ±0.005 None 150~200 ≥120 1 Radiator fin and plate
4343/3003/4343 H14 0.06~0.1 ±0.005 8~12 150~200 ≥120 1  
4343/3003/4343 H14 0.08~0.12 ±0.005 8~12 150~200 ≥120 1 Parallel condenser fin
4343/3003/4343 H14 0.1~0.12 ±0.005 8~12 150~120 ≥120 1 Charge air cooler material
4045/3003/4045 H14 0.1~0.12 ±0.005 8~12 150~200 ≥120 1  
1060 O 0.35~0.4 ±0.02 None 55~95 ≥15 25 Air cooling fin material for tubes
1100 O 0.35~0.4 ±0.02 None 75~105 ≥25 25  
3003 O 0.2~0.3 ±0.01 None 100~150 ≥45 15 Aluminium for heating element
3003 H16 0.5~0.7 ±0.02 None 150~210 ≥120 1  
4047 H18 0.05~0.1 ±0.005 None ≥200 ≥170 0.5  
4047 O 0.4~0.5 ±0.02 None 80~140 ≥35 12 Welding wire
7072 H19 0.12~0.15 ±0.005 None 145~172 ≥15 0.5 Fin stock
4A13 H18 0.05~0.1 ±0.005 None ≥190 ≥16 0.5 Aluminium for heating element
4104 H18 0.05~0.1 ±0.005 None ≥220 ≥190 0.5  
3003 (inner fin) O 0.2~0.3 ±0.007 None 100~150 ≥45 15 Oil cooler
6951(inner fin) O 0.2~0.3 ±0.007 None 115~165 ≥50 15  
3003(external fin) H14 0.1~0.15 ±0.005 None 150~200 ≥120 1  
3003(inner fin) O 0.2~0.3 ±0.007 None 100~150 ≥45 15 Engineering machinery
3003(inner fin) H12 0.2~0.3 ±0.007 None 120~160 ≥85 2  
3003(external fin) H14 0.1~0.15 ±0.005 None 150~200 ≥120 1  
Physical Property Data of Plate Material
4343/3003 O 1.2~3.0 ±0.03 5~10 100~150 ≥45 25 Radiator fin and plate
4343/3003/7072 O 1.2~3.0 ±0.03 5~10 100~150 ≥45 25  
4343/3003/4343 O 0.4~0.5 ±0.02 8~12 100~150 ≥45 27 Evaporator fin and plate
4045/3003/4045 O 0.8~1.2 ±0.03 8~12 100~150 ≥45 27  
4045/3003/4045 O 2~3 ±0.05 8~12 100~150 ≥45 25 Charge air cooler material
4045/3003/4045 O 0.5~0.8 ±0.02 15~20
10~15
100~150 ≥45 25 Oil cooler
4104/3003/4104 O 0.5~0.8 ±0.02 15~20
10~15
100~150 ≥45 25  
4104/3003/4104 H14 0.6~0.8,
1.2~1.5
±0.02
±0.03
13~17
8~12
150~200 ≥120 3 Engineering
Machinery
4004/3003/4004 H14 0.6~0.8,
1.2~1.5
±0.02
±0.03
13~17
8~12
150~200 ≥120 3