The Circulating Fluidized Bed Boiler Fan is designed as part of an industrial boiler (1-20 t/h) that burns various types of coal, and is equipped with smoke and dust suppression. It can be used for boilers with similar air inlet conditions and good performance, but the temperature should not exceed 250 °C, and the fan medium is flue gas.

Install Using:

The Circulating Fluidized Bed Boiler Fan comes with an integrated base so users don't need to install the base themselves. When installing, the user only needs to put the whole fan on the ground, adjust the level, and fix it with anchor bolts. Users can also choose the special shock absorber of our factory, and the entire fan is placed on the level ground through the shock absorber, without the need for anchor bolts, which is convenient for installation and adjustment.

When using the fan, there is too much flow and not enough flow. This is mainly due to inaccurate calculation of pipe network resistance or changes in pipe network resistance. If the flow gradually decreases for a long time during use, or suddenly decreases in a short period of time, it is mainly caused by the blockage of the pipe network.

http://www.industrialfanchina.com/