Timing belt 24v dc drum motor of the electric drum is a drum with its own power, which is reasonably installed inside the steel pipe after integrating the motor, gear reducer and sensor. Therefore, motor, chain, intermediate shaft or other auxiliary drive
Thin walled bearings are bearings with a relatively low profile and compact design. Its advantages include light weight, high stiffness, high accuracy, and low friction. The structure and design of thin-walled bearings enable them to support high radial a
1. Mould material: S50C, P20H, 718H, 2738, S136 and etc.2. Cavity no.: single3. System of runner: hot runner, cold runner4. Ejection type: ejection pin, air gate, hydro cylinder5. Term of mould production: 50days---60days
Sumitomo SC550-2 Track roller track roller includes track roller body, shaft, bushing and caps. Track roller body is supported on the shaft through bushing. On both sides of the track roller body, there are caps and bushing, bushing is over shaft and cap
Front parts of cabin including front panel board, front panel middle board, corner board, front grouped lamp, rear-view mirror base, grid and bumper, etc. are redesigned completely.
Size: NPS1/2” to NPS8”(DN15 to DN200) Pressure Rating: ASME Class150 to Class2500 (PN16 to PN420) Body Material: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Stainless Seat: Soft, Metal to Metal
ELECMAN ® Rigid Steel Conduit (RSC) is a circular cross-section canalization used for Electrical installations in any type of building, hot-dipped galvanized on both external and internal.